Wire winding pipe usage scenarios

Steel wire braided hose is an upgraded product of rubber hose, which is lighter, smaller in diameter, and more convenient to install. It is suitable for the transportation of various media and chemical materials. Steel wire winding pipes are mostly used in hydraulic ultra-high pressure transportation. The temperature is between -40°~+120°. The inner pipe is imported nylon, which is smooth and has low resistance. The reinforcing layer is high-strength steel wire, and the outer layer is made of elastic and durable Abrasive, weather-resistant material. Excessive temperature will accelerate the effect of chemicals on the rubber material, which depends on the ratio of polymer and chemicals.

Emergency repair methods for high-pressure hoses: 1. Sticky repair method When the rubber hose with the pressure of the hydraulic system between 25-8.0MPa breaks, the sticky repair method can be used: wipe the area around the rupture of the hose; Apply one of anaerobic glue, epoxy resin glue, 801 glue or 502 glue to the rupture (the length of the glue is about 2-3 times the length of the rupture); 4-5 layers of glue; tie the two ends of the canvas strip with the wrapping tape into dead knots; it can be used after it has solidified. Litong's furnace door cooling hose specially solves this problem. The outer rubber of the hose is made of high temperature resistant rubber. In the case of an open flame, the outer part of the hose is equipped with an armored protective layer, and the middle of the cooling hose is filled with thermal insulation material. Ensure a safer working environment for hoses.

The joint of the furnace door cooling hose and the connection part of the equipment are treated with special hoisting chains, so that the link that is most prone to failure at the joint is completely solved. It has high cooling efficiency and long service life, especially suitable for high temperature and hot metal or glass splashing environment.

The size of the LT1212 150PSI corrugated cold-resistant oil suction and discharge pipe can be customized according to customer requirements, generally up to 4 feet. The internal rubber used in the pipe body has a certain conductivity, and the color is black; the constant pressure of the pipe is 150psi, the lowest temperature can reach minus 54 degrees Celsius, and in the case of low temperature, it is also very flexible, its outer layer is made of a blue corrugated rubber, which has wear resistance, oxidation resistance characteristics, The service life of the pipe body is improved. In life and work, it will be squeezed and rubbed more or less. If the hose being transported bursts or is damaged at this time, it will bring great trouble to the manufacturer and even cause huge economic losses. Therefore, it is necessary for a conveying hose to withstand pressure and wear. Compared with ordinary conveying hoses, wear-resistant hoses have much higher pressure and wear resistance. It ensures the stability and safety of the production process, and allows the entire production chain of the manufacturer to operate in a more orderly manner. The woodworking ventilation rubber hose has strong wear resistance. If the copper-plated steel wire is grounded, it can also discharge static electricity, which can be used for material suction and discharge.