Teflon material reduces wear and tear of tubes

1. Composition: The acid and alkali transport pipe is composed of inner rubber layer, adhesive cloth layer and outer rubber layer.

2. Performance and use: This type of hose is suitable for conveying dilute acid (acid) solution when the concentration is below 40% under positive pressure conditions (it can be adapted to 40% sulfuric acid, 30% hydrochloric acid, 15% sodium hydroxide, but nitric acid is excluded) use. Applicable temperature range: the ambient temperature is 20 to 45 °C; the temperature of the conveying medium is not higher than 45 °C.

 

In March 2018, Litong Hydraulic Technology Co., Ltd. successfully bonded PTFE rubber. As we all know, PTFE is a material with strong lubricity and a very low coefficient of friction. Take the glue with strong adhesion for testing. It is difficult to hang on the wall, so no company has been able to achieve complete adhesion of this material to other materials before. In order to achieve a breakthrough in technology, Litong Hydraulics spends a lot of manpower and material resources on testing. The waste absorbed by the anti-wear conveying pipe required by the paper industry must pass through the hose before being conveyed into the garbage bin, usually absorbing some dust, debris and slag. , particulate matter, etc., under the operation of ultra-high pressure and high speed, the wear and tear damage to the rubber hose is actually very large. Therefore, when choosing a hose, you must pay attention to choosing a rubber hose with strong wear resistance. For more convenient and flexible application, a softer hose should be selected. Oil exploration has always been one of the representatives of a country, and the oil pipelines produced by Litong are API specifications. Conforms to 16D specification, shows flame retardancy and consistency according to 30-minute flame data test, and has also obtained Ukrainian GOST oil certification and Lowe fire certification. Litong products are used in extreme conditions such as high risk, high pressure and high temperature. The production of styrene-butadiene rubber is made in Germany and is committed to development and production.

 

The R&D team is strong and the R&D strength is strong. There are 80 R&D personnel, 55 professors, doctoral supervisors, and 55 technical personnel with master's degree or above. The high investment in R&D drives strong R&D output. The research results are competitiveness, and the continuous research results and new technologies are applied to rubber and hose products, which makes Litong at the forefront of advanced rubber hose manufacturing. This type of hose can be used to transport hydraulic oil, fuel oil and other mineral oils and benzene. , xylene and other organic solvents, and high-pressure resin pipes can be used as flexible pipes for hydraulic systems such as loading and unloading machinery and paint spraying. It can be used in various industries such as air, water, chemical lubrication, instrument lines, irrigation control systems, textile mills, food plants, fuel delivery pipes for vehicles and ships, vacuum systems, air conditioning systems, oscillating insulators, electrostatic insulators, etc. It can maintain flexibility in the temperature range of -40℃-+120℃ and work normally.

 

We will update more about -chemical delivery pipe gradually, so stay tuned.

Tags you may be concerned about: tube conveying chemistry Number of related label articles: tube (935) conveying (275)