Hot Tar Asphalt Dressing Delivery Pipe
2022-04-15 13:47:20
LT1217 300PSI Hot Tar Asphalt Dressing Delivery Pipe The pipe body is used for pumping and discharging tar and hot asphalt on oil tankers and oil tankers below 180°C, the inside of the pipe is made of black nitrile rubber, which has good High heat resistance, high tension steel wire braid can protect the pipe body continuously under the pressure of 300psi. Neoprene is a kind of wear-resistant, oxidation-resistant, hydrocarbon-resistant and fire-resistant rubber. The outer layer of the tube is wrapped, which greatly enhances the use characteristics of the tube body. The anti-wear conveying pipe required by the paper industry can only be transported to the waste bin through the rubber hose, and usually absorb some dust, debris, slag, particulate matter, etc., under ultra-high pressure and high-speed operation, the rubber The wear and tear of the hose is actually very large, so when choosing a hose, you must pay attention to choosing a hose with strong wear resistance. For more convenient and flexible application, a softer hose should be selected.
The multifunctional hose is never required, almost all means of transport can be safely transported through it, even corrosive liquid chemicals (sulfuric acid, hydrochloric acid, sulfur reagents, etc.) will not corrode. It cleans itself well and has maximum resistance to sticky substances (whether glue or grease) and is not sticky. It can withstand high pressure, the safety factor is 4 times, the inner diameter is 2 inches, and it can easily withstand the pressure of 25MPa. It is safe, powerful and proprietary, ideal for chemical, food and high temperature operations. According to the manufacturing process of four-layer winding high-pressure hydraulic hose, Litong API 16D hose uses fire-resistant rubber as the raw material for the outer rubber layer of the hose, and is covered with stainless steel armor on the outside of the hose. The pipe body acquires fire resistance and fire resistance. In the course of 17 years of development, Luohe Litong Hydraulics has continued to innovate, and imported Finland's ultra-high pressure hose winding production line with world-class equipment. At the same time, the company has a professional e-commerce team, which has laid the foundation for the promotion of domestic and cross-border e-commerce. Litong Company has successfully developed Super Hercules series hydraulic pipes, super wear-resistant cleaning hoses, and oil drilling and transportation hoses.
The frosted UPE film is made of high-quality raw materials, with a minimum molecular weight of 840, which meets ISO requirements. According to customer requirements, it can be made into any thickness of 0.0.08-3mm. At the same time, because of its low density, light weight, good stability and long service life, it is more wear-resistant than traditional Teflon, and its high temperature resistance is only It is inferior to Teflon material, so it is the first choice material that can gradually replace Teflon. Litong LT799 ultra-high pressure resin cleaning hose uses nylon (PA) as the inner layer material, wound high-strength steel wire as the reinforcement layer, and black or colored polyurethane (TPU) as the outer layer of the hose. The working temperature is between -40 ℃ to Between 100°C, the maximum working pressure is as high as 320MPa (the inner diameter of the hose is 7.8mm), and the maximum burst pressure is 800MPa. It is the quality choice for users of extreme high-pressure cleaning hoses.
We will update more about -Teflon- gradually, so stay tuned.
Labels you may be concerned about: Teflon Related tags Article number: Teflon (7) Dragon (38)