What is a tubing?
2022-05-07 10:48:00
Oil pipelines are pipes that transport crude oil and natural gas from oil and gas formations to the surface after drilling is completed, and are used to withstand the pressures generated during the extraction process. Oil pipe is a general term for oil pipe casing, oil pipe, drill pipe, kelly, weighted drill pipe, drill collar, etc. and line pipe for oil and gas transportation. It is an important and indispensable raw material in the oil and gas industry, and its consumption accounts for more than 0% of the total steel used in the oil industry. When the towed water pump matched with the concrete wear-resistant pipe is used, it is forbidden to put your hands into the hopper and water tank. During the pumping process, the concrete material should be kept above the mixing shaft, and there should be no air suction or no material pumping. If the pump is stopped for a long time, the pump must be turned on every (15-30) minutes, the pump must be reversed for 1-2 strokes, and the pump is stroked 1-2 times to prevent the concrete material in the pump from condensing in the wear-resistant pipe.
MT98 mining steel wire wound rubber hose adopts the industry-leading wear-resistant rubber compound. In the selection of structural materials, the pipe body can well isolate or reduce vibration and suppress sound vibration during use. This type of pipe body can be customized according to customer's specific application. In addition, we have a complete process for producing joints and can provide various hose ends according to customer requirements. Our perfect after-sales team can timely and effectively solve customers' problems during use , one or more layers of steel wire braiding is used in the middle, which can withstand steam transmission at a maximum temperature of 200 degrees Celsius. In addition, its working pressure can also be increased according to the number of steel wire braiding layers used in its reinforcement layer, and can withstand a maximum working pressure of 20Mpa and 170Mpa. burst pressure.
The ultra-high pressure rubber hose has one or more layers of steel wire braided outside the bellows, and is made of rubber. Low temperature resistance (-196℃~+420℃), light weight, small size, good flexibility and so on. It is usually used to transport high temperature media such as corrosive chemical media, organic solvents, high temperature gas, hot oil, and low temperature or ultra-low temperature media. The inner lining of the hose should be composed of oil-resistant and water-resistant rubber, the reinforcement layer of the hose should be composed of textile and steel wire (rope) materials, and the outer coating of the hose should be composed of oil-resistant, abrasion-resistant and weather-resistant rubber, with the surface along its length. There should be a colored belt to facilitate the application and installation of the hose, the purpose of editing, the drilling hose, the wire winding drilling hose is used in oilfield cementing, workover and petroleum geological exploration, small drilling rigs and hydraulic coal mining, transporting mud and other fluid media.
We will update more about -Petrochemical Hose- gradually, so stay tuned.
Tags you may be concerned about: hose petroleum chemistry Related tags Article number: hose (569) petroleum (236)