What is an OMA production line?
2022-06-13 15:19:40
Secondly, the high-pressure rubber hose is soft and has a small bending radius, and the inner reinforcement layer of the tube body and the rubber are well bonded; while the inner rubber layer and reinforcement layer of the new ultra-high pressure resin tube are basically non-adhesive, even if the manufacturer adopts the adhesive and agent and other materials as compensation; but after all this is a defect. This problem is firstly caused by the insufficient accuracy of the current hose crimping equipment, and secondly, the quality of the pipe joints is not up to standard.
OMA production line adopts computer/PLC control system to realize setting all operation, product, process and other parameters on the digital display of the computer; any equipment failure will be immediately alarmed, and the cause and solution of the failure will be displayed on the computer display ; The distance is automatically adjusted and continuously adjusted by the computer-controlled synchronous system; Ultra-high-speed operation, each coil is driven by an independent motor, with high voltage regulation accuracy, and large-capacity coils ensure long-term continuous production; Fully electronic synchronous control performs automatic production . Litong has always been striving for excellent quality, continuously improving product performance and extending the service life of hoses. There will always be wear and tear of the hose during use, and there will be failures of one kind or another. Litong has tried again and again, focusing on customer experience, and using sleeves and protective screens on the outside of the hose when necessary.
Litong's rubber hose also has a good degree of bending, and proper bending can better fit the installation of the joint and prevent the rubber hose from being twisted. LT1304 75PSI dry bulk food discharge pipe - FDA grade, mainly used for discharging or conveying dry bulk food products, the inner layer of the pipe is made of 3/16 ratio white NR rubber - corrosion resistance, high tension The textile cord is wound and the conductive wire is used for enhanced protection. The outer layer of the tube is made of gray SBR/EPDM rubber, which has good wear resistance and oxidation resistance. The maximum working pressure can reach 75psi. Luohe Litong provides technical consultation in the research and development, design and manufacture of fluid related equipment, and makes breakthroughs in the field of oil drilling and production with high requirements.
On the basis of rubber hose, Litong actively develops the application of rubber hose in various fields, overcomes various difficulties, and develops rubber hose products with high temperature resistance, wear resistance, acid and alkali resistance. The suction and discharge pipe is suitable for mud dredging in rivers, lakes, oceans and other places. The slurry suction and discharge hose has good wear resistance. The device includes three parts: reinforcement and cover. The pipes are made of high-quality synthetic rubber, such as NB, SBR, BR, etc., to make them wear-resistant and corrosion-resistant. The reinforcement layer is made of multi-layer high-strength helical wires, so the torsion resistance is good. High-strength reinforcement, so that the hose can adapt to high-pressure environment. The outer sheath of the hose is made of synthetic rubber including NR, SBR and BR, which is resistant to wear, corrosion, weather, ozone, aging. A hose with good elasticity can be in close contact with the pipe through the flange.
We will update more content about -acid and alkali resistant hose price-, so stay tuned.
Tags you may be concerned about: hose price acid and alkali resistance
Related tags Article Quantity: Resistant (536) Hose (569)