EN853 1SN/2SN Steam Resistant Hose

EN853 1SN/2SN steam-resistant hoses can be used for petroleum-based hydraulic fluids or water. They can withstand temperatures from -40 to +100 degrees Celsius. They are designed for outside applications and are made of high-quality synthetic rubber blends and high-tensile steel wires.

EN853 1sn/2sn steam resistant hose

The EN853 1SN/2SN steel reinforced hydraulic hose can be used with water and petroleum-based hydraulic fluids. It can withstand temperatures from -40degC up to 100degC. Its high-tensile steel wire reinforcement helps it resist corrosion and abrasion. It is ideal for use outdoors.

Both EN853 1SN & 2SN hydraulic hoses can be used for medium-pressure hydraulic applications. They are made with synthetic rubber cores and reinforced with high-tensile wires of steel. These hoses can be used at temperatures between -40 and 100 degrees Celsius, and 212 degrees Fahrenheit.

Low pressure hose supplier

En 853 1SN/2SN steam resistant hoses are used in hydraulic systems that require oil and water-based hydraulic fluids. This type of hose is made from oil-resistant synthetic rubber with a steel wire reinforcement and is suitable for use outdoors in a range of temperatures from -40degC to +100degC. The inner tube is made from high-tensile steel wires and the cover is made of high-quality synthetic rubber compounds.

When choosing the right hose for your application, it is important to remember several factors. You can make a good selection using the acronym STAMPED. This acronym stands for Size, Temperature, Application, Media, Pressure, Ends, Delivery.

Pressure resistance is a crucial factor when choosing a hose. A product should have a higher pressure resistance than the desired working pressure. This is often calculated using a safety factor, which is a ratio between the maximum working pressure and the burst pressure. This safety factor is 4:1 for hydraulic applications. Special static applications have a safety factor of 2.5. Protective layers are added to protect the pressure. High-pressure hoses may also feature steel wire spirals.

SAE 100r17 oil hydraulic rubber hose

SAE 100R17 oil hydraulic rubber hose is steam and heat resistant and meets the requirements of EN853 1SN/2SN. Its design incorporates a thermoplastic inner tube reinforced with suitable synthetic fibers. It is commonly used in vacuum applications and suction lines for hydraulic systems. Its tensile strength is up to 2750Mpa.

High-pressure hydraulic Hoses are ideal for both high-pressure and low pressure applications. They can be used for transporting petroleum-based hydraulic oil, water, and air. Moreover, the outer cover of these hoses is made of two layers of fabric to provide extra strength. These hoses are used in construction, logging, agriculture, oil equipment, and other industries.

The pressure resistance of a hydraulic hose should be higher than its working pressure. This is called the safety factor. This safety factor is 4 in hydraulic applications. Special static applications have a safety factor of 2.5. Textile reinforcements, such as nylon or rayon fabrics, can provide extra strength and durability. To increase the resistance of a high pressure hose, steel wire spirals can be added.